June 10, 2008, PETALUMA, CA—Calix
today announced a new addition to its access portfolio that expands Ethernet
services capacity over both fiber and copper networks. The Calix E5-400 meets
growing network traffic demands by adding carrier-grade 10 gigabit Ethernet
(10GE) and multiple gigabit Ethernet (GE) aggregation and transport
capabilities to the Calix unified access infrastructure.
[Editor's note: See also today's
release entitled, "New Calix Ethernet Service Platforms Deliver High-Speed
VDSL2 over Copper"]
Part of the Calix E-Series
Multiservice over Ethernet product family, the Calix E5-400 allows service
providers to address their bandwidth challenges head-on:
- The E5-400 provides standards-based, redundant, non-proprietary 10GE, NxGE, and GE
transport and aggregation across the access network.
- It delivers ultra-high-capacity IP services support over fiber to the premises
(FTTP) and last-mile copper infrastructure.
- Service providers can deploy the E5-400 with other E-Series products and the Calix C7
to create a comprehensive unified access infrastructure that supports advanced
Ethernet services as well as legacy services such as POTS, Specials, DS-3, and
OC-3/12/48 SONET.
- A hardened, 1 rack unit (RU) form factor enables flexible deployment from the CO
to the network edge.
- The E-400 is fully managed via the Calix Management System (CMS), which in turn
provides a single network view and a common user experience independent of
media type, protocol, or service
"Service providers need to
address the growing capacity challenges posed by advanced IP services with
carrier-grade, highly reliable, high-bandwidth solutions for business and
residential customers," said Frank Wiener, vice president of product
development at Calix. "The E5-400 combines the flexibility of a compact and
hardened form factor, the capacity of 10GE, and alignment with industry
standards to deliver the first widely deployable 10GE transport and aggregation
solution for the access network."
New Platform Addresses Need for Increased Network Capacity
The Calix E5-400 addresses major
trends pushing higher bandwidth requirements in the access network, such as an
increasingly connected consumer lifestyle and skyrocketing rates of content
exchange and consumption. As competition grows, service providers need to
quickly bring to market an increasing array of advanced IP services while
lowering capex and opex. To keep up with these demands, service providers need
solutions that enable higher-bandwidth services, simpler management, and new
revenue sources.
"IdeaOne's business subscribers
leverage our services for mission-critical applications," said Bob Johnson, CEO
at IdeaOne Telecom of Fargo, North Dakota. "Calix's new offering lets us keep
expanding our business services by meeting the bandwidth and reliability
demands of our largest customers, including hospitals, high-tech companies, and
financial institutions. Calix access solutions ensure that our networks are
stable and redundant, with no single point of failure. Plus, we have the peace
of mind that we'll be able to meet our customers' needs well into the future."
"Network traffic is growing dramatically
due to fundamental shifts in how consumers and businesses are finding,
accessing, and sharing content," said Matt Davis, program director of consumer
multiplay services at IDC. "To address this growth, service providers need solutions
that have the raw capacity to reliably handle and manage the volume of traffic,
plus the flexibility to be deployed effectively and efficiently wherever they're
needed. The ability to snap into existing network infrastructure will be a key
driver in the wide deployment of these solutions, and service providers will
clearly favor adherence to standards."
The Calix E5-400 – A Carrier-Grade Ethernet Access Platform
The flexible, secure, scalable,
and environmentally hardened Calix E5-400 platform includes these unique features
and benefits:
- Its compact 1 RU form factor provides greater flexibility, enabling deployment in
the field or the CO. For last-mile delivery, providers can deploy the Calix E5-400 by dropping GE services directly to the business or home.
- New layers of protection include enhancements to ITU G.8032 Ethernet Automatic
Protection Switching (Enhanced EAPS), IEEE 802.1w Rapid Spanning-Tree Protocol
(RSTP), and IEEE 802.3ad link aggregation to ensure network flexibility and
redundancy. Enhanced EAPS creates a fault-tolerant topology for VLANs that
ensures highly available Ethernet switched rings. RSTP enables redundant links
for automatic backup if an active link fails.
- With support for multiple SFP, XFP, and SFP+ ports and a robust switching fabric,
the E5-400 provides flexibility, capacity, and redundancy across copper and
fiber Ethernet interfaces.
A Natural Complement to the Calix Access Portfolio
The E5-400 brings a new addition
to the Calix E-Series product family that is fully managed by the CMS. When
combined with the other solutions in the Calix access portfolio – the Calix C-Series, F-Series, and P-Series platforms – the E5-400 plays a key role in providing a
comprehensive unified access infrastructure that delivers a single managed
network for advanced services while providing operational and capital
efficiency.
Availability and Live Demonstration
The Calix E5-400 platform, which
is in use in customer networks today, is available now on a limited basis. Calix expects it to be available generally in Q3 2008.
The E5-400 will be on display at
NXTcomm 08 in Las Vegas, June 17-19, at Calix booth SU8010. The new Calix
platform will be part of an industry-first, live, advanced IP services demonstration
that includes Microsoft Mediaroom middleware, HD linear and on-demand video
content, and a host of interactive services. A dazzling user experience will
be delivered across a redundant 10GE Enhanced EAPS ring created by multiple
E5-400s and subsequently delivered across copper and fiber media via the Calix E5-120 (VDSL2), the Calix C7 (GPON), and the Calix E5-111 (bonded ADSL2+) platforms.
Links
The E5-400 – http://www.calix.com/products/e-series/calix_e5-400.html
Keywords
Ethernet, 10GE
About Calix
Calix is the largest telecom equipment supplier focused
solely on access solutions for broadband service delivery. Service providers
deploy Calix access systems to enable a rich set of information, communication,
and entertainment services and to expand their revenue base beyond
connectivity. Calix access innovation helps service providers transform their
networks from circuit to packet, narrowband to broadband, and copper to fiber.
Calix has deployed millions of ports and tens of thousands of systems into
hundreds of service provider networks throughout North America. For more
information, visit the Calix website at www.calix.com.
This press release may contain forward-looking statements
that are based upon management's current expectations and are inherently
uncertain. Forward-looking statements are based upon information available to
us as of the date of this release and we assume no obligation to revise or
update any such forward-looking statement to reflect any event or circumstance
after the date of this release. Actual results and the timing of events could
differ materially from current expectations.
Any information in this press release regarding future
product plans is based on current expectations, but is not a commitment,
promise or legal obligation to deliver any new product (hardware or software),
feature, or functionality. The development and release of any new
product, feature, or functionality remains at Calix's sole discretion, and no
statements in this press release should be relied upon in making purchase
decisions.
For additional information contact:
Jeannette Bitz
Engage PR
510-748-8200 x207
jbitz@engagepr.com
